whitey10tc
01-30-2010, 02:01 PM
How to flash a Vogue to cricket with GPS (Updated 1-29-2010)
I have included a link to custom ROMs in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
To be effective and avoid trouble everything here must be done in the order written.
Install the following before anything else [Only registered and activated users can see links] (thanks edru)
#1 use msl grabber to get the msl/spc code found here
[Only registered and activated users can see links]
install via activesync or sd card and run on ppc.
#2 unlock with the 2.31 unlocker listed here
[Only registered and activated users can see links]
Read and follow the direction. VERY IMPORTANT!
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
[Only registered and activated users can see links] 30_AM_NV_2.04_Ship.exe
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
After this point you may need to run the unlocker again.
#4 Go to the following and download
QPST and windows htc driver [Only registered and activated users can see links]
activesync4.5 [Only registered and activated users can see links]
Vista users will need this driver [Only registered and activated users can see links] (Thanks to Sergey123456 from XDA)
Install QPST on computer
Install htc drivers on computer
Install Activesync 4.5 on computer
Put phone into diag ##3424# or (snd) mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone set up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 209.210.15.72
pde port # 8888
pde transport IP
Position calculation mobile
Write to phone
close out
I would recommend now to flash a custom ROM here is a link to some of mine. [Only registered and activated users can see links]
Install on a FAT32 formated 2gig or less msd card and rename to VOGUIMG.NBH THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting. (included in my rom) or you can download one from [Only registered and activated users can see links] or from this site.
then go to [Only registered and activated users can see links] it will help you set up your pst setting correctly.
Install the cricketwapmms cab if you are using another ROM not linked here.
YOU CAN DOWNLOAD THE MMS CAB FROM HERE [Only registered and activated users can see links] then do the following GPS Registry edits after installing desired ROM: or install the attached cab.
"HKLM\SOFTWARE\HTC\SUPL AGPS"
"GPSMode" value="2"
"ServerPort" value="8888"
"ServerIP" value="209.210.15.72"
Do not try to open a data connection untill you have cricket service on the phone.
[Only registered and activated users can see links]
you must have service.
If you are using one of my new ROMs you do not need the MMS/WAP cab and no further registry edits are needed.
Credits go to
Baffles for the MSL grabber,
ImCokeMaN for the unlocker and his great tutorial
Ryanmogul6800 on XDA for his great software and his perfect PST setting.
Questions belong in threads not PM's!
I have included a link to custom ROMs in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
To be effective and avoid trouble everything here must be done in the order written.
Install the following before anything else [Only registered and activated users can see links] (thanks edru)
#1 use msl grabber to get the msl/spc code found here
[Only registered and activated users can see links]
install via activesync or sd card and run on ppc.
#2 unlock with the 2.31 unlocker listed here
[Only registered and activated users can see links]
Read and follow the direction. VERY IMPORTANT!
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
[Only registered and activated users can see links] 30_AM_NV_2.04_Ship.exe
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
After this point you may need to run the unlocker again.
#4 Go to the following and download
QPST and windows htc driver [Only registered and activated users can see links]
activesync4.5 [Only registered and activated users can see links]
Vista users will need this driver [Only registered and activated users can see links] (Thanks to Sergey123456 from XDA)
Install QPST on computer
Install htc drivers on computer
Install Activesync 4.5 on computer
Put phone into diag ##3424# or (snd) mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone set up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 209.210.15.72
pde port # 8888
pde transport IP
Position calculation mobile
Write to phone
close out
I would recommend now to flash a custom ROM here is a link to some of mine. [Only registered and activated users can see links]
Install on a FAT32 formated 2gig or less msd card and rename to VOGUIMG.NBH THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting. (included in my rom) or you can download one from [Only registered and activated users can see links] or from this site.
then go to [Only registered and activated users can see links] it will help you set up your pst setting correctly.
Install the cricketwapmms cab if you are using another ROM not linked here.
YOU CAN DOWNLOAD THE MMS CAB FROM HERE [Only registered and activated users can see links] then do the following GPS Registry edits after installing desired ROM: or install the attached cab.
"HKLM\SOFTWARE\HTC\SUPL AGPS"
"GPSMode" value="2"
"ServerPort" value="8888"
"ServerIP" value="209.210.15.72"
Do not try to open a data connection untill you have cricket service on the phone.
[Only registered and activated users can see links]
you must have service.
If you are using one of my new ROMs you do not need the MMS/WAP cab and no further registry edits are needed.
Credits go to
Baffles for the MSL grabber,
ImCokeMaN for the unlocker and his great tutorial
Ryanmogul6800 on XDA for his great software and his perfect PST setting.
Questions belong in threads not PM's!