PDA

View Full Version : Samsung Smooth Tutorial



Dex
01-30-2010, 03:41 AM
Here is the Samsung u350 tut and dll with mmcs for cricket

U350 Tutorial ([Only registered and activated users can see links])

bawanyh
03-02-2010, 08:01 PM
Hey Dex I have this tutorial but I just want to ask u something general about this u350. Is there a way to do a full flash this phone if I have a bulk quantity? because I know we have to do it after activation right?

GT*Superbee
03-25-2010, 08:30 PM
you must edit the mmc with the correct mdn before you write it to the phone in order to get wap and mms, you can go through and pre-flash them with a prl and then just do the full flash as you sell them

ownmart
04-01-2010, 04:08 AM
*note* do not read the phone again in pst at least on the prepaid.
or it will rewrite your MMS settings on the manual programming part.
and you will need to do those steps again.

Also for some reason when I reset after saving, the /mms does not stay on the servlets/mms on the MMS User Agent. during the manual program part

ten0rplaya04
04-01-2010, 10:45 AM
In Samsung PST, did you click the Prepaid button and change it over to "Postpaid"? I don't know if that's a required step or not but could it cause the phone to revert it's settings?

Dex
04-01-2010, 11:20 AM
no u dont have to do a thing this tut was written specifically for the prepaid version the word doc included explains the full steps required and all sammys revert once the fone is programmed

dafkuwant
04-01-2010, 03:03 PM
Hey whats the password to the tutorial file?

Dex
04-02-2010, 02:37 AM
thats what pms r for lol i forgot it had a pass on it i am putting a post limit on it as of now of 15 posts or more for it

ten0rplaya04
04-12-2010, 11:36 PM
I had flashed this U350 and when I dial out to anything other than *228 it goes to "Welcome to the American Roaming Network." *228 goes straight to the activation and programs my phone correctly. Any clue why this is happening?

whitey10tc
04-12-2010, 11:42 PM
I had flashed this U350 and when I dial out to anything other than *228 it goes to "Welcome to the American Roaming Network." *228 goes straight to the activation and programs my phone correctly. Any clue why this is happening?If *228 will connect to cricket, and a regular call goes to ARN my guess would be the ESN is either not in crickets system or is incorrect in crickets system. Or account issues.

ten0rplaya04
04-13-2010, 02:34 AM
The ESN is there because *228 programs the phone. Otherwise, the phone number wouldn't be on there. The account should be fine, but I guess I'll call customer care and see if they have any info on why it might not be working.

maokly
04-14-2010, 05:57 PM
whats the password?

ten0rplaya04
04-15-2010, 01:14 AM
Question....does the phone need to have been activated on Verizon before I flash it? I'm not having much success with this phone dialing out.

thephoneguy913
04-15-2010, 09:13 AM
*611 should dial to Cricket Support...otherwise you should try to download the 1039 prl or like Withey said...make sure the ESN is correct in your account...also, make sure that the ESN in the sticker is the same in the phone info...that could be the problem.

Dex
04-15-2010, 11:23 AM
whats the password?

Get to 10 posts and i will tell u via pm but u must let me kno when u get there i dont track users

thephoneguy913
04-15-2010, 11:33 AM
Or probly you gonna have to rewrite the ESN in your phone...that happened to me when I did the flash in the U340...for some reason the ESN changed to zeros after the flash...but I fixed with CDMA Workshop.

ten0rplaya04
04-15-2010, 12:01 PM
The ESN is in the system correctly...I've checked it with CDMA Workshop -_-. I'm gonna try a few more things before I'm completely pissed off on this phone. Glad I picked up the 5600's lol.

kevininaz
04-27-2010, 11:12 PM
Make sure that the SID is correct for your region. Also, if 611 gets you to cricket, and ESN on the sticker and phone match, then check the MDN, MIN, manually, or with PST.

wthigon
05-24-2010, 03:08 AM
This is bothering the crap out of me.

Flashed it Talk, Text, WAP work fine but Pic Messaging only works outbound not inbound...I can even tether just fine. What could be the problem with my situation? Bad Phone?

I have had the account refresh a few times also. By the way I'm on Pocket

Not the fastest internet (Tether)

Download Speed: 134 kbps (16.8 KB/sec transfer rate)
Upload Speed: 108 kbps (13.5 KB/sec transfer rate)

thinline
07-28-2010, 04:13 PM
so what is the password for the u350 tutorial

whitey10tc
07-28-2010, 04:32 PM
so what is the password for the u350 tutorialRead through the entire thread. The OP has a post count limit on it. It's posted here just got to read through it.

jgriff83
08-02-2010, 07:26 PM
I can't wait to get this going!!!

shutfu
08-09-2010, 07:00 AM
I would really appreciate the password information for this tutorial. I've learned a whole lot in the past 2-3 days and had some progress in accomplishing the subjective task, but I am currently stuck in a rut and frustration is building! Oh well

thesmitty68521
08-09-2010, 11:46 AM
I would really appreciate the password information for this tutorial. I've learned a whole lot in the past 2-3 days and had some progress in accomplishing the subjective task, but I am currently stuck in a rut and frustration is building! Oh well

Your best bet would be to PM the original poster.

rodriguez69
09-29-2010, 09:24 PM
I know there a lot of questions about the password of the tutorial but I'm lost!
Please help! need the password

thesmitty68521
09-29-2010, 09:47 PM
I know there a lot of questions about the password of the tutorial but I'm lost!
Please help! need the password

PM the original poster for this information. His name is Dex.

If you can't reach him, simply get the Samsung PST, the U350 DLL, and the Cricket PRL. Then you just manually input the Cricket settings. It's nothing really special. There is also an mmc file on here for this phone as well.

If you have any other questions, feel free to ask. Thanks.

rodriguez69
09-30-2010, 09:50 PM
Im very new in this, I gone a try what you told me, and I let you know

Thank you very much.

rodriguez69
10-05-2010, 09:10 AM
I get one samsung PST but is not running, were can i get one that works?

thesmitty68521
10-05-2010, 10:55 AM
I get one samsung PST but is not running, were can i get one that works?

What error are you getting? What Operating system are you using on your pc? What version of Samsung PST did you try to install?

If you give us a bit more info as to what your problem is, we can get you up and going. Thanks and welcome to Gurus.

Dex
10-05-2010, 05:55 PM
If u are in need of the password u must have a post count of 10 and u will get the install pass without it the tut is useless without it so if u dont have 10 posts dont waste ur space

BeachTroy
01-04-2011, 09:41 AM
I have a Verison Samsung U350 that I would like to use with Cricket is it possible to flash it? I've been trying to use Samsung PST but I can't get it to load the dll for the u350. Any help would be greatly appreciated. I am a noob at this and this is the first phone like this I have to flash. iPhones are a breeze compared to this thing. Thanks in advance.

rich hathaway
01-04-2011, 10:04 AM
you should start your own thread,with regaurd to this. but i will tell you this,you have to have the dll in a models folders in the samsung pst folder,so if you dont,create a folder name it models and place the unpacked dll in that folder,you also have to have the correct drivers installed on your computer they are here on the site in about 10 places. look around for them and if you cant find them start a new thread title it appropriatelly and post it and i or someone else will help you further. good luck.

BeachTroy
01-05-2011, 10:31 PM
I got a newer version of Samsung PST and it worked great.

fedii
01-23-2011, 06:05 AM
i think he is rite

Alesia
02-05-2011, 04:29 AM
I didn't use this tutorial to flash my phone but I'm hoping someone might be able to help me my settings were reset recently & I had to go through and change everything again I have everything working but mms when I try to send a message I'm getting a "Invalid destination address" I've been over the settings multiple times but I cant figure out the problem.Has anyone had this issue? any help would be appreciated