Join Today













Site Sponsor

View Poll Results: Wazup!??

Voters
105. You may not vote on this poll
  • This ROXORZ!!!

    77 73.33%
  • Whatever..

    17 16.19%
  • FAIL!!!

    11 10.48%
Results 13 to 18 of 152

Threaded View

  1. #1
    Apprentice
    Join Date
    Sep 2010
    Posts
    36
    Rep Power
    0

    Thumbs up How to Unlock the LG Rumor Touch - VM510 from Virgin Mobile (possibly others)

    After about a month and a half of blood, sweat and tears with this phone, I proudly present.. a solution!!

    Preface: Yes, this will get you the crown jewel, the SPC code to unlock your phone, which Virgin Mobile says they don't have, and LG says their contract won't allow them to give out. No, your phone doesn't have an MSL code. That's the same thing on a different type of phone. No, I don't care where you read it, trust me.
    [hide-thanks]
    Step 1) Download and install the 'LGMobile Support Tool'. Next, follow the instructions, also found on the link below, to install the USB Modem Drivers:
    [Only registered and activated users can see links. ]

    Step 2) Download 'LG Download Pro' version1.6.0, then install it.
    [Only registered and activated users can see links. ]

    Step 3) Download the file 'LG Download DLLs MSI.rar' from the link below. (hint: You have to click the Thank You buttons before it will show you the Hidden Content) You might also want to download the file in the first post, if you plan on using this program for different phones.
    [Only registered and activated users can see links. ]

    Step 4) You will need to send a PM to Dex [Only registered and activated users can see links. ] or Eric [Only registered and activated users can see links. ] to get the password for 'LG Download DLLs MSI.rar'.

    Step 4a) ALTERNATIVELY: Thanks to PxToro, you can download and install JUST the 9100 dll in an msi file here:
    [Only registered and activated users can see links. ]

    Note that if you end up needing the other dll files, you will need to download the archives in step 3.

    Step 5) Extract LG Download DLLs MSI.rar then install the 9100 dll using 'VX9100 DLL.msi'. I found information to indicate that the 9900 dll would also work with this phone, but that didn't work for me. Install the other dll's at your prerogative, it certainly won't hurt anything.

    Step 6) Just to make sure everything is properly installed, go ahead and reboot your computer now.

    Step 7) Go to your Start Menu >> Programs and double-click on 'LGDownload'. Next, Click on the 'Select DLL' button. After the popup window appears, click on 'Tri Mode', then double click on the VX9100 dll. Click 'Ok' on the popup. Now, click on the 'NV Edit' button on the left hand side. LGDownload is now ready to do it's job.

    Step 8) Plug the USB data cable for the phone into the computer (NOT into the phone, yet).

    Step 9) You may find it useful to open up the Windows 'Device Manager' and expand the 'Ports' section. This will allow you to see when and for how long the USB modem port is actually connected (you will also notice the GPS port connecting, but don't try to use this port for our purposes here). Simply drag Device Manager down to the bottom corner while you are using the other programs in the top corner. I found conflicting information saying that you may need to set the port speed (Bits per Second) in the Device Manager AND the program to either 9600 or 115200. Mine worked set at 115200. Either way, it is DEFINITELY a good idea to make sure both are set to the same port speed (which is technically called the Baud Rate.)

    Step 10) Now to prep the phone. We'll only have about 1 minute flat to do the next few steps, so be sure you have everything laid out and ready before you proceed. We are now going to 'time out' the phone, but it only lasts for about a minute at a time.
    Method 1) Some folks recommend copying 999 or fewer mp3 files to your SD card then opening the built in Media Player. Some people just copy the same mp3 file over and over again until they have 999 of them. (If you have 1000 or more mp3s on this phone, it will ignore you. If you already have a dozen ringtones and etc. on the phone, best stick with 900 or so.) This will 'time out' this phone for a minute or two.

    Method 2) Another method I discovered is to download a nice big World Map pdf file, then open it with the Document Viewer and zoom in on it repeatedly. Once you zoom in far enough, the phone will 'time out' for about 1 1/2 minutes. These first two methods really drag the phone to a grinding halt though, and you may or may not have enough 'horsepower' left over to complete the tasks below. I recommend the third method:

    Method 3) The third method I use, is to add about a hundred or so txt and pdf files under a folder named 'eBooks' on the SD card. Next, simply open the 'Document Viewer' under the Tools menu. The phone will ignore everything else you do for about a minute or so, but the phone isn't actually doing much at all, so you'll have plenty of 'horsepower' to finish up.
    Pick one of the three methods and proceed immediately to the next step.

    Step 11) Now, plug the USB cable into your phone.

    Step 12) After a few seconds, you will notice the 'Phone Status' bar in the LGDownload program start to fill up with information (if you've done everything properly up to this point). Once that is finished, you will notice the big 'NV Edit Start' button in the center switch from being 'grayed out' to being black and selectable. Click it!

    Step 13a) A pop up window will appear asking for the Service Program Code. Of course, we don't have it yet, because that is what we are trying to get. DON'T TYPE ANYTHING! Simply click the 'Ok' button, and cross your fingers. You should see a brief popup saying that it is 'Enabling DM Mode', immediately followed by saying that it is 'Reading NV RAM'. If you picked the third method above, it should proceed very quickly and finish in a few seconds. If you picked one of the other two methods, it may take a while, and may not finish at all. You may need to repeat steps 10-13 a MINIMUM of 20 times or more before it completes.

    Step 13b) Ta-Da! You should see a new popup window. In the 'Security Information' screen, SEC_CODE should have your 6 digit SPC code listed. You can double check on the 'System' tab, find the entry listed as 'Service Programming Code'. This should also list your SPC Code. You rock! Stick your finger in the air and curse at Virgin Mobile! Now, proceed to step 16.

    Step 14a) ONLY IF you get stuck after clicking 'Ok' for the SPC code, you may need to reset the 'Password'. The recommended way to do this is to download and install the cracked 2.7 version of CDMA Workshop:
    [Only registered and activated users can see links. ]

    Note that if you are doing this professionally, or need more flexibility and features, you should pay for and download the full current version here:
    [Only registered and activated users can see links. ]

    Note that the 'Crack' for CDMA Workshop 2.7 sets off some virus scanners. It's perfectly safe, just tell your virus scanner to ignore it, or shut it off until you're done. Either way, restart your computer (once it's installed) then go to Start Menu >> Programs and double click on 'CMDA Workshop' (note: If you do NOT restart your computer, you WILL need to close LGDownload in order to disconnect it from the USB Modem port). Repeat steps 10-11 above to 'time out' the phone again and keep the modem port open for about 1 minute. Immediately click on the 'Port' selector and select the port the phone is using (probably around port 5-9, mine uses port 7 for the USB modem, and port 8 for the GPS port) Click the 'Connect' button, then the 'Read' button. If everything is working properly, the 'Phone Information' bar will fill itself in shortly. Now click on the 'Security' tab, then click on the 'Custom Password' selector. Type '0000000000000000' (sixteen zeros) into the field, then click the 'Send' button.

    Step 14b) If you are feeling lucky (this next bit didn't work for me), still using CDMA Workshop, click the drop-down box under SPC, then select 'LG Method' and click the 'Read' button. If that gives you your SPC code, skip to step 16 below. If not, close CDMA Workshop (or at least click the 'Disconnect button on the 'Main' tab), then go back to step 7 and proceed through step 13 to give it another shot.

    Step 15) Still no luck? Go back to step 7 and this time select VX9900 dll (of course, you need to have installed it earlier). It didn't work for me, but good luck. Still no luck? I dunno, hit up Google for 'SPC Calculator'. Supposedly there's an LG one, but I never found an SPC calc that worked for me (for this phone). You could try any of the other dll files, but none of the other ones were recommended. On the far-fetched end of the spectrum, you could find and try either the Qualcomm Phone Support Tool package, (QPST) or the LG version, LGNPST. I had limited success even getting these to talk to the phone, but best of luck! There's a wealth of information right here in this forum, so don't ignore the little search box up at the top if you decide to investigate any of these methods.

    Step 16) Once your phone decides to stop ignoring you, click 'No' and close whatever other programs you had running. Once you're back to the stupid red 'Home' screen, push the little 'Phone' button to bring up the dial pad. Dial ##port# (##7678#) Ooo!! Cool secret stuff.. Now, type in your SPC Code (the phone says 'Enter Service Code'). Almost done. Click where it says 'DM Mode Enable' This will switch the USB port from being used to connect the phone as a removable hard drive, to using the USB modem port and GPS port whenever you plug the phone into your computer. If you want to switch your phone back to being a removable hard drive, simply repeat this step, except this time select 'UMS Mode Enable'.
    [/hide-thanks]
    You're done!! Good job! Now you can change settings, view your file system, tether your phone to your computer as a modem, unlock the phones firewall.. The possibilities are endless!! At least until you do something STUPID and crash your phone like a computer with a nasty virus. This is commonly known as 'bricking' your phone. After that point your phone is not useful for anything other than being a paperweight, or possibly as a brick in a wall. So.. do NOT go doing a bunch of crazy stuff on your phone until you find specific instructions on how to do it, and read up on other people who followed those instructions without turning their phone into a brick!

    I just opened the seashell, it's up to you guys to go out there and dig for pearls!

    *** Feeling especially Generous, Thankful or Ecstatic? Quick! Click my paypal link below, and throw me a few bucks before you change your mind!
    [Only registered and activated users can see links. ]

    (Hope that last bit isn't against forum rules, just giving them a chance to donate, not demanding money. Feel free to delete it if it's a No-No Whitey or Dex or..?)

    **EDIT** 9/15/2010 per Dex

    IF YOU ARE AT ZERO POSTS DO NOT PM ME OR ERIC303 for the password to the RAR file it will not happen you need to contribute to the community first
    Last edited by Dex; 09-15-2010 at 05:26 PM. Reason: whitey added hide thanks it needed it ..Added in PxToro's .msi link


 

Similar Threads

  1. Rumor Touch Virgin Mobile
    By clever7981 in forum General Disscussion
    Replies: 1
    Last Post: 04-27-2011, 11:15 PM
  2. Ringtones (The lazy Way) - Virgin Mobile LG Rumor Touch - MORE TO COME
    By ChulaaSoYUM in forum [cricket] LG Rumor series
    Replies: 0
    Last Post: 02-26-2011, 07:54 PM
  3. How to Flash A Brand new Lg Rumor Touch From Virgin Mobile
    By DFOGG2579 in forum [cricket] LG Rumor series
    Replies: 2
    Last Post: 12-10-2010, 01:25 AM
  4. Moved>>>Help - Unlock Virgin Mobile Rumor Touch - LG VM510
    By Crogon in forum General Discussion
    Replies: 11
    Last Post: 09-10-2010, 12:26 PM
  5. How do I flash a Virgin Mobile LG Rumor Touch to Cricket?
    By missunderstood in forum [cricket] LG Rumor series
    Replies: 0
    Last Post: 07-26-2010, 05:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •