Join Today













Site Sponsor
Results 7 to 8 of 8

Threaded View

  1. #1
    Apprentice
    Join Date
    Jul 2013
    Posts
    12
    Rep Power
    0

    Programming Guidle for Overdrive Pro to Verizon Pre-Paid (Part 1)

    Programming the Overdrive Pro to Verizon.
    ----- Phone:Gusto2 Phone
    Using:DFS CDMA
    Using: HW Virtual SerialPort

    NOTE:THIS IS DONE IN 2 PARTS, THE FORUM CAN ONLY ACCEPT SO MANY CHARACTERS PER POST.(PART 1 AND PART 2)
    [hide-thanks]
    This is assumed that those reading this have some knowledge of programming devices.

    Connect the Gusto2 via USB cable.Then open DFS program.Connect to the Gusto by selecting to the Samsung port. Do this by clicking the Port Tab. Once connected to the port you need to enter the Password and SPC Code.
    SPC Code is 210706 Password is: 2011101116083112

    Click on the Programming Tab.You will see General, Nam, Data and Mobile IP; tabs under the programming tab. Click on each tab and do a read on all of the areas of each tab you select. Once the info is done you will need to make some changes. The IMEI read you do in the General page, will show nothing as Gusto2 does not have IMEI.

    Lets do each page:

    Changes:Do a read on the General Page.On the General Page select NV_Only under the Ruim Confg. Setting.At the SPC setting change the 210706 code to 000000. You will want to do this change to 000000 as the Overdrive Pro uses that SPC Code.Next go to your Nam Page and do your read there. You will notice that the IMSI Box at the middle left side of the page is empty. Insert the IMSI number in that box. Get the IMSI number by clicking on the Equipment Tab left to the Programming Tap and it’s under the column Snapshot. Get that number go back to the Nam and enter that number. Next is you PRL. You can get your PRL on your read. Load that PRL in your saved files.As a note, your Gusto2 will also show your PRL.
    Next is Data Tab. Before doing your read for this page you want to check 3 boxes. They arePPP, HDR AN, HDR AN Long Keys and are on the left side of the screen. Make sure that all 3 boxes have the same info. You will have your phone number with the Verizon address.Example: [Only registered and activated users can see links. ]. That’s all you have to do to this page.Next is the Mobile IP Tab.Do a read on this page. There is only 1 read button. Once you have done your read you need to make some changes to this page as unlike the Novatel or Samsung MiFi’s, the Overdrive Pro uses Profile 1 instead of Profile 0. To be safe we will program both Profile 0 & 1 with the same info but will use Profile 1 on our WRITE.

    So you can reference to this, there are 4 sample pages attached to this instructional to make it easier for your step by step programming.

    Ok, now we do a disconnect of the Gusto2. Click on the icon to the right of the Ports tab and you will see it turn red.Open your HW Virtual Serial Port program. You will need to set some items on this program. Click the login button. Another box will pop up, just click OK.Next you will need to uncheck NV Enabled Tab in the Settings Tab Page. Then go to the Virtual Serial Port Page and set up your Virtual Serial Port.Under Port Name, select COM13.Under IP Address select 192.168.0.1. Under Port enter 5503.
    Next, connect your Overdrive Pro to the USB cable.Make sure the Overdrive Pro is off. It will turn on when you connect the USB, and that’s fine. Wait about 30 seconds or less and you will see the VSP Status say Created and the Lan Status say Connected. This has to say that.If you have problems, connect to the Overdrive Pro via wireless and USB. That seems to help if you run into problems. Once your connected via HW, minimize the program and go back to DFS.Click on Ports. You should see a selection with ELTIMA COM13. Click on that selection and you should see the red port connection icon turn green. Once your connected to the Overdrive Pro, you will need to enter your SPC and Password. Some don’t use the password and just the SPC, but do both, it cannot hurt. Your Overdrive Pro SPC Code is 000000. The Overdrive Pro Password is: 563085992436B40A. Click the Programming Tab and select General Page and clickWRITE on all of the tabs. Then click on the Nam Tab for its page and click on the 2 WRITE tabs.Go to Data Page and do WRITE as well. Note: There is only 1 WRITE tab on this page. Now go to the final page.Mobile IP. We have to do some minor changes here. First, under Select Profile Settings, you want to make sure there is no “dun” in either the NAI or the RM NAI. Both should be the same. It should be this: [Only registered and activated users can see links. ].NOT [Only registered and activated users can see links. ]. Remember, REMOVE THE dun. Your AAA and HA should already have the hex keys in from your Gusto2 read. Now we move over to the Mobile IP Main Settings. This is important if you want to Overdrive Pro to work. You must make Profile 0 and 1 the same and leave it on Profile 1 when doing your WRITE.First thing you do is make sure Profile 1 is like we just discussed.It should be set.Now you check the first RED Profile Dot and in the Active Profile box change from O to 1. You will see that the profile is different to the right. What you need to do is copy and paste your Profile 0 setting to a notepad and paste them to Profile 1 have it ready for your WRITE. Once you have made sure Profile 1 is the same as Profile 0 your ready to do your WRITE.Click WRITE and when it’s done, then click Write Current Profile Settings. At this point and time you should be done. Click the port tab next to the Ports tab and it will turn red. Remove the USB cable and remove battery from the Overdrive Pro and that will do a reset.Turn on Overdrive Pro and it should be ready for you to connect to your service. You may need to go through the connection process by selecting 3g service only and GPS. But it should connect. Your SSID and Password should be on your screen display on your Overdrive Pro. Just remember you can reference to the pics that are with this instruction.
    NOTE: The numbers used are not real but they are laid out as if they were accurate. Good Luck !

    Words of Wisdom: You have to be real about what you pay for your internet service. Paying $100.00 for an Refill Card to get a year will not work. I know they advertise on Ebay, but taking that option will only get you shut down. The least you should pay is $35.00 for a Refill Card. Be smart and not so cheap.[/hide-thanks]
    Last edited by fbguy57; 04-16-2014 at 01:17 PM.


 

Similar Threads

  1. Sierra Overdrive PRO flashed to verizon using a gusto 2. Buying Guide.
    By superhuman in forum SIERRA WIRELESS / NETGEAR
    Replies: 21
    Last Post: 07-22-2014, 09:52 AM
  2. 2200 shutdown on Verizon pre paid
    By cspircoff in forum Novatel / Inseego
    Replies: 12
    Last Post: 07-17-2013, 08:12 PM
  3. Samsung SCH-i510 Verizon 4G LTE nam programming
    By hvrcompucel in forum Verizon general discussion
    Replies: 0
    Last Post: 03-13-2012, 12:38 PM
  4. How to activate a pre-paid phone on post paid Verizon
    By devin1205 in forum Verizon general discussion
    Replies: 6
    Last Post: 07-23-2010, 05:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •